Specifications
| Die cutting speed | 20-80- strokes/min (depending on the length of the charge) |
| Die type | Laser rubber die (low cost and fast change) |
| Incoming width | ≤350mm (including pole ear) |
| Incoming thickness | 0.08～0.3mm |
| Effective die cutting area | 320*150mm |
| Incoming uniformity error | ≤±0.5 mm (coating width error) |
| Coating & Breakage | Continuous coating, unilateral out of the pole ear, and the pole ear damage is less than 0.5mm |
| Receiving mode | The manipulator automatically picks up the film |
Frequently Asked Questions (FAQ)
What is the die cutting speed of the machine?
The die cutting speed ranges from 20 to 80 strokes per minute, depending on the specific length of the charge.
What type of die is used in this equipment?
It utilizes a laser rubber die, which offers a low-cost solution and allows for fast and easy changeovers.
What are the width and thickness limits for incoming materials?
The incoming material width should be ≤350mm (including the pole ear), and the incoming thickness must be within the range of 0.08 to 0.3mm.
What is the effective die cutting area?
The effective die cutting area of the machine is 320*150mm.
How does the system handle film receiving?
The system features an automated receiving mode where a manipulator automatically picks up the film.
What are the requirements for coating and pole ear damage?
The process requires continuous coating with unilateral out of the pole ear, and the pole ear damage must be kept strictly under 0.5mm.